starlase_logo

UV Laser Marker

 

UV Laser marker is equipped with a 355 nm UV laser that is the end off three times the frequency of diode end pump Laser. It has high conversion rate between laser and electricity.

UV laser has super precision marking capability with low heat affected zone

UV Laser is widely using in Drilling of tiny holes, Flexible PCB, LCD, TFT marking and slicing. Silicon wafer slicing etc.

 
UV-Laser-Marker
 
 
Model UV3 UV5 UV8
Laser UV Laser UV Laser UV Laser
Wavelength 355 nm 355 nm 355 nm
Laser Power 3W 5W 8W
Beam Quality ≤ 1.2 M2 ≤ 1.2 M2 ≤ 1.2 M2
Min. Line Width 20 μm 20 μm 20 μm
Min. Char. Size 0.15 mm 0.15 mm 0.15 mm
Modulating Frequency 25 ~ 100 Khz 25 ~ 100 Khz 25 ~ 100 Khz
marking Area 100 x 100 mm (Std) 100 x 100 mm (Std) 100 x 100 mm (Std)
Marking Speed ≤ 7000 mm/s ≤ ≤ 7000 mm/s ≤ 7000 mm/s
Cooling System Water Water Water
Power Consumption ≤ 1.5 KW ≤ ≤ 1.5 KW ≤ 1.5 KW
Electrical requirement 220VAC / 50 Hz / 15A 220VAC / 50 Hz / 15A 220VAC / 50 Hz / 15A
Dimensions ( L x W x H ) 500 x 500 x 650mm 500 x 500 x 650mm 500 x 500 x 650mm
UV Laser Marker, Laser, marking machine, Laser machine, laser cutting machine manufacturers, laser marking machine, laser cutting machine, laser machine manufacturers, laser marking machine manufacturers, Ahmedabad, Gujarat, India